New Tank Syndrome

New Tank Syndrome

When you set up a new fish tank for the first time, there are a few things you can expect to happen.

With a brand new filter, your nitrogen cycle has not been established. It will take 4-6 weeks MINIMUM to start cycling your new tank. There are countless products who claim they can instantly start your cycle, but they DO NOT WORK. We tested many products and only one was able to shorten our cycle by one week.

During those sensitive weeks, your tank will undergo the following spikes in ammonia, nitrite and finally, nitrate, as those bacteria colonies are established. You tank’s temperature and filtration capacity will determine how fast your cycle is established.

As your nitrogen cycle is established, your fish can be in danger of toxic levels of ammonia and nitrite. Therefore, it is essential to keep you bioload low in those first few weeks! Rather than fully stocking your tank from the get-go, start with only a few, hardy fish until your cycle is established. Keep a close eye on your parameters with a water quality test kit. Plot your readings and you will match the graph above.

Ammonia-binding products will prevent this cycle from occurring. Your tank will be stuck in perpetual “new tank” standing. We understand that it can be very scary to see your new tank spike with ammonia, but you cannot get to the end stage without the journey in between. Keep a close eye on your parameters and bioload low in the first 4-6 weeks and you’ll be all set from then on! If you’re really worried, or your fish start to act sickly, do a small water change to decrease the spike. And if you decide to replace your filter media every month, your tank will be continually cycling. So, ignore the box, and invest in a sturdy sponge instead.

Advertisements

Stop Replacing Your Filters!!

Stop Replacing Your Filters!!

Dear Fish Tank Owners,

Please stop replacing your filter media every month.

I know it says to do so on the box! But, guess what? They do that in order to SELL MORE!!

Remember how our nitrogen cycle works? You need those bacteria!

When you take out your old filter media and toss it in the trash, you are discarding all of your good bacteria. These good bacteria maintain your biological filter and keep your nitrogen cycle up and running.

Most of those floss filter pads are designed to fall apart rapidly. Replace your filter media with a sturdy sponge and it will last you for several years! In order to keep them clean, squeeze them out gently in your waste water after siphoning your tank.

I know this goes against everything that is printed on the sides of your box of filter media pads, but you have to trust us. We are telling you this in the best interest of your fish and system. Just try it!

 

The Nitrogen Cycle

The Nitrogen Cycle

As you may well know, water quality is a significant aspect of pet fish health. Like the air we breathe, the water a fish swims in is directly linked to their overall health. As a fish veterinarian, we routinely test the water our patients swim in for various parameters. We discussed pH and kH previous, so today, let’s look at the nitrogen cycle.

As you may notice, the traditional nitrobacter and nitrosomas bacteria species have been omitted from this diagram. This is due to the fact that there are just SO MANY different bacteria species involved in nitrogen-fixation, that we cannot simply define them in these two genuses.

In a fish tank, a fish’s primary waste is ammonia. Ammonia is produced by the breakdown of protein, the main staple of most fishes’ diets. Ammonia is excreted out through the urinary tract and gills. Ammonia is highly toxic to fish, causing death and increased secondary illness, so it is converted, through nitrogen-fixing bacteria, into nitrite. Now, nitrite can be just as bad as ammonia. Methemoglobinemia, or “Brown Blood Disease,” is caused by a build-up of nitrite. Nitrite can bind to hemoglobin in the blood and outcompete oxygen. This causes a brown coloration and the fish will asphyxiate from lack of oxygen. Thankfully, more nitrogen-fixing bacteria convert nitrite into the final nitrate. Nitrate is safe for fish at low levels, but at higher levels, and depending on the fish species’ tolerance, can cause the same issues as high ammonia. Nitrate is removed from the system by aquatic plants or water changes.

In established systems (over 2 months old with no new fish or equipment), your ammonia should be ZERO. Most low readings indicate your filtration capacity is inadequate or secondary to overfeeding. The highest reading acceptable on our test kit is 0.1 mg/L. The traditional API freshwater master test kit ranges between 0-0.25, so attaining a 0.1 reading will not occur. Due to the broad range of values, a 0.25 reading may be a false positive (reporting a higher value than what is actually present).

There are many commercial additives for removing ammonia from your tank prior to the nitrogen cycle. Some can cause ammonia test kits to read falsely high. These additives are short-term solutions that should only be used with significant health issues. They are not a long term maintenance solution. You MUST establish your biological filtration (good bacteria) for long-term fish health. If you have persistent ammonia in your tank, consider the following solutions:

  • Is your filtration adequate? Tanks with higher bioloads (size and number of fish) will require more than standard filtration. When in doubt, always filter more than you should.
  • Are you feeding appropriately? Remember, ammonia is produced from breakdown of protein in a fish’s diet. More food = more ammonia. Check your protein levels! For more information on fish diets, read this.
  • Are you doing lots of water changes? If you are constantly removing ammonia, your nitrogen-fixing bacteria will never become established.
  • Is there ammonia in your source water? Check the level coming out of your tap or well to make sure! You may need to consider another water source.

There are also commercial additives that will “quick start” your nitrogen cycle. Sorry folks, but these are a complete scam. With the exception of one product that slightly shortened the establishment of your nitrogen cycle, it will take 4-6 weeks MINIMUM to get your tank properly cycled. By “cycled,” we mean the establishment of a complete nitrogen cycle with ammonia being converted all the way to nitrate. We recommend starting with very few fish and monitor your ammonia, nitrite and nitrate levels carefully!

If you have any more questions about fish and nitrogen cycles, please comment below.